English
中文简体 | 中文繁体 Flux Series
Home>Flux Series>6-4 Special Flux for the Solar Battery Components Assembly
Flux Series
6-4 Special Flux for the Solar Battery Components Assembly
6-4-1 9011 Flux Characteristics
1. Low solid content and higher heat-resistant
2. Powerful penetration on the Cu foil
3. The Cu foil surface is clean and the solder joint is bright after soldering
4. Quality is very stable
9011 Specification
NO. | Specification Item | specs |
01 | Flux Model | 9011 |
02 | Flux Categopy | solar cells special purpose |
03 | Chemical Classification | ORG |
04 | Joints Color | Colorful |
05 | Solid Content | 1.30±0.5wt/% |
06 | Physical State | Liquid |
07 | Color of Liquid | L-yellow |
08 | Specific Gravity(20℃) | 0.800 |
09 | Acid value | 11.07mgkOH/g |
10 | spray factor | ≥90% |
11 | Halide content | 0.09 |
12 | Insulation Resistance | ≥1.0×1011Ω |
9011 Compositions
Ingredients | Contents | Threshold Limit value(TLV) |
Moldfied Resin w/w | 2.0-8.0 |
|
Surfactant | 1.0-2.0 |
|
High Boiling Point Solvent | 2.0-13.0 |
|
Organic Acid Activator | 1-5 |
|
Heat Stabilizer | 1.0 |
|
Run-Agent Help | 1.0-6.0 |
|
Film-Forming Agent | 2.0-3.0 |
|
Solvent | others | 400ppm |
9011 Physical And Chemical Characteristics
Appearance | Liquid | Odour | Aromatic |
Specic Gavotte(20℃) | 0.795±0.010 | Melting Point(℃) | -90 |
Boilng Point(℃） | 83.0±2.0 | Vapor Densitv(Air=1) | 2.0 |
Vapor Pressure | 32mmHg | Evaporation Rate(Ether=1) | 16-20 |
9011 Reactivity Data
Stabiltty | Stable |
Conditions To Avoid | Keep In Cool Dry Place Avoid Direct Sunlight And Extensive Heat |
Incompatbility(Materials To Avoid) | Acid Or Alkaline Solutions, Water, Grease, Inorganic Materials |
Hazardous Decomposition Products | Oxidant |
Hazardous Polymerization | Will Not Occur |
